Cyclic performance of emulative precast beam to column con-nection with corbel using dowel bar

Authors

  • Rajeswari M Department of Civil Engineering, PSG College of Technology, Coimbatore, Tamilnadu (India)
  • Jaya KP Division of Structural Engineering, Anna University Chennai - CEG campus, Chennai, Tamilnadu (India)

DOI:

https://doi.org/10.7764/RDLC.21.2.354

Keywords:

Precast Beam Column, Seismic Behaviour, Emulative, Cyclic loading, Dowel bar Connection, cast-in-situ concrete

Abstract

The objective of this study is to examine the seismic performance of exterior and interior types of an emulative precast beam to column connection, constructed with grouted steel dowel bar and cast-in-situ concrete under quasi-static reversed cyclic loading. The dowel bar connection between the precast structural elements is achieved by inserting the dowel bar into the column corbel's holes and the precast portion of the beam. To secure the dowel bar's anchorage, these holes are packed with non-shrinkage grout and then cast-in-situ concreting is done in the joint core and the entire upper segment of the precast beam. In the past, particularly after an earthquake in the Emilia-Romagna region of Italy in May 2012 (Ercolino, Magliulo, & Manfredi, 2016), witnessed damage to precast reinforced concrete structures was more likely to occur in the precast beam-column joint section. Hence, it’s essential to improve the performance of the beam-column joint to withstand all possible lateral load combinations, which are to be included in the design and detailing of the precast structural components. This study analyzed an eight-story RC frame building for earthquake loading using Staad.Pro software. The exterior and interior types of proposed beam-column connections were designed and detailed using the design forces and moments computed by the Staad.Pro analysis, in accordance with the Indian standard codes (IS 456, 2000), (IS 1893, 2016)and (IS 13920, 2016). The beam-column joint behavior under quasi-static cyclic loading was studied using one-third scaled-down test specimens, i.e., monolithic (MBC-EJ & MBC-IJ) and emulative beam-column (EBC-EJ & EBC-IJ) exterior and interior joints. In that proposed emulative connection, the structural continuity and compatibility between the precast elements were achieved through the corbel with the dowel bar and cast-in-situ concreting. The test specimen’s ultimate and yield load carrying capacity, energy dissipation capacity, stiffness degradation, and ductility parameters were determined based on the obtained load-displacement hysteresis relationship. Based on the findings, the precast exterior joint specimens (EBC-EJ) were found to be 14.36% more ductile and 13.23% more energy dissipative than monolithic exterior joint specimens (MBC-EJ). Similarly, precast interior joint specimens (EBC-IJ) outperformed monolithic interior joint specimens (MBC-IJ) by 6.27% more ductility and 16.86% more energy dissipation. Therefore, the experimental results confirmed that using grouted dowel bars and wet concreting in the joint area enhances rigidity and structural continuity, as well as improves the ultimate strength of precast connections to a level that closely resembles typical monolithic beam-column joints.

References

ACI 550.2R-13. (2013). Design guide for Connections in Precast Jointed Systems. Joint ACI-ASCE Committee 550, American Concrete Institute

ASTM E2126-11. (2012). Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical elements of the Lateral Force Resisting Systems for Buildings

Aguiar, E. A. B., Bellucio, E. K., & Debs, M. K. El. (2012). Behavior of grouted dowels used in precast concrete connections. Structural Concrete, 13(2), 84–94. https://doi.org/10.1002/suco.201100048

Blandón, J. J., & Rodríguez, M. E. (2005). Behavior of Connections and Floor Diaphragms in Seismic-Resisting Precast Concrete Buildings. PCI Journal, 50(2), 56–75. https://doi.org/10.15554/pcij.03012005.56.75

Bournas, D. A., Negro, P., & Molina, F. J. (2013). Pseudodynamic tests on a full-scale 3-storey precast concrete building: Behavior of the mechanical connections and floor diaphragms. Engineering Structures, 57, 609–627. https://doi.org/10.1016/j.engstruct.2013.05.046

Elliott, K. S. (2016). Precast Concrete Structures (Second edition). CRC Press.

EN 1992-1-1. (2004). Design of concrete structures - Part 1-1. General rules and rules for buildings.

Ercolino, M., Magliulo, G., & Manfredi, G. (2016). Failure of a precast RC building due to Emilia-Romagna earthquakes. Engineering Structures, 118, 262–273. https://doi.org/10.1016/j.engstruct.2016.03.054

Fischinger, M., Zoubek, B., Kramar, M., & Isaković, T. (2012). Cyclic response of dowel connections in precast structures. 15th World Conference on Earthquake Engineering.

Ghayeb, H. H., Razak, H. A., & Ramli Sulong, N. H. (2020). Performance of dowel beam-to-column connections for precast concrete systems under seismic loads: A review. Construction and Building Materials, 237, 1-25. https://doi.org/10.1016/j.conbuildmat.2019.117582

IS 13920. (2016). Code of Practice for Ductile Detailing of Reinforced Concrete Structures Subjected to Seismic Forces. Bureau of Indian Standards, New Delhi, India.

IS 1893. (2016). Code of practice for criteria for earthquake resistant design of structures-General Provisions and Buildings. Bureau of Indian Standards, New Delhi, India.

IS 456. (2000). Indian Standard Code of Practice for Plain and Reinforced Concrete. Bureau of Indian Standards, New Delhi, India.

Isakovic, T., Zoubek, B., & Fischinger, M. (2019). Cyclic capacity of dowel connections. In Geotechnical, Geological and Earthquake Engineering (Vol. 47). https://doi.org/10.1007/978-3-319-78187-7_11

Kremmyda, G. D., Fahjan, Y. M., Psycharis, I. N., & Tsoukantas, S. G. (2017). Numerical investigation of the resistance of precast RC pinned beam-to-column connections under shear loading. Earthquake Engineering and Structural Dynamics, 46(9), 1511–1529. https://doi.org/10.1002/eqe.2868

Kremmyda, G. D., Fahjan, Y. M., & Tsoukantas, S. G. (2014). Nonlinear FE analysis of precast RC pinned beam-to-column connections under monotonic and cyclic shear loading. Bulletin of Earthquake Engineering, 12(4), 1615–1638. https://doi.org/10.1007/s10518-013-9560-2

Magliulo, G., Ercolino, M., Cimmino, M., Capozzi, V., & Manfredi, G. (2014). FEM analysis of the strength of RC beam-to-column dowel connections under monotonic actions. Construction and Building Materials, 69, 271–284. https://doi.org/10.1016/j.conbuildmat.2014.07.036

Nimse, R. B., Joshi, D. D., & Patel, P. V. (2014). Behavior of wet precast beam column connections under progressive collapse scenario: an experimental study. International Journal of Advanced Structural Engineering, 6(4), 149–159. https://doi.org/10.1007/s40091-014-0072-3

Parastesh, H., Hajirasouliha, I., & Ramezani, R. (2014). A new ductile moment-resisting connection for precast concrete frames in seismic regions: An experimental investigation. Engineering Structures, 70, 144–157. https://doi.org/10.1016/j.engstruct.2014.04.001

Tarabia, A., Allam, S., Etman, E., & Aboelhassan, M. (2019). Behavior of precast reinforced concrete beam-column external connections under cyclic loading. WIT Transactions on the Built Environment, 185, PII-27-PII-43. https://doi.org/10.2495/ERES190031

Tarabia, A. M., Etman, E. E., Allam, S. M., & Aboelhassan, M. G. (2021). Modeling of Precast Reinforced Concrete Beam-column Joints Under Cyclic Loading. Journal of Earthquake Engineering, 1–30. https://doi.org/10.1080/13632469.2021.1964651

Vidjeapriya, R., Vasanthalakshmi, V., & Jaya, K. P. (2013). Performance of exterior precast concrete beam-column dowel connections under cyclic loading. International Journal of Civil Engineering, 12(1 A), 82–94.

Vintzeleou, E. N., & Tassios, T. P. (1987). Behavior of Dowels Under Cyclic Deformations. Structural Journal, 84(1), 18–30.

Yuksel, E., Karadogan, H. F., Bal, I. E., Ilki, A., Bal, A., & Inci, P. (2015). Seismic behavior of two exterior beam-column connections made of normal-strength concrete developed for precast construction. Engineering Structures, 99, 157–172. https://doi.org/10.1016/j.engstruct.2015.04.044

Zhou, Y., Chen, T., Pei, Y., Hwang, H. J., Hu, X., Yi, W., & Deng, L. (2019). Static load test on progressive collapse resistance of fully assembled precast concrete frame structure. Engineering Structures, 200. 1-14. https://doi.org/10.1016/j.engstruct.2019.109719

Zoubek, B., Isakovic, T., Fahjan, Y., & Fischinger, M. (2013). Cyclic failure analysis of the beam-to-column dowel connections in precast industrial buildings. Engineering Structures, 52, 179–191. https://doi.org/10.1016/j.engstruct.2013.02.028

Downloads

Published

2022-08-31 — Updated on 2022-08-31

Versions

How to Cite

M, R., & KP, J. (2022). Cyclic performance of emulative precast beam to column con-nection with corbel using dowel bar. Revista De La Construcción. Journal of Construction, 21(2), 354–367. https://doi.org/10.7764/RDLC.21.2.354